General water supply, pressurization of water by using pressure vessels (autoclaves), horticultural irrigation, mist irrigation, dairy and farm applications, water transfer and garden watering applications.
Note, it is generally advisable to fit either a non-return valve or foot-valve to the suction.

Pump body in AISI 304 stainless steel, motor support in die cast aluminum. Impeller/diffuser in thermoplastic resin, on request in s/s, seal retaining disc in AISI 304 stainless steel.
Mechanical seal in graphite/ceramic.
Rotor shaft in stainless steel fitted with seal for life bearings.
Totally enclosed fan cooled motor (TEFC).
Single phase motors with a built in thermal overload protection on request, the capacitor is permanently in circuit.
Motor protection to IP44 (available in IP55 upon Request).
Winding Insulation to class F.
Standard Voltage: 230V-50Hz single phase, 230V/400V-50Hz three phase.
Other voltages and frequencies available upon request.

– Capacities up to 3.6 m3/hr
– Heads up to 48 meters.
– Liquid quality required: clean free from solids or abrasive substances and non aggressive
– Maximum Temperature of pumped liquid -15°C to 50°C
– Maximum ambient temperature 40°C For higher temperatures please contact the sales office
– Maximum working pressure 6 bar
The tolerances of the hydraulic features are according to UNI / ISO 2548 – Class C, Appendix B, electric features according
to C.E.I.
The working features listed in the catalogue are based on continuous service for clear water with a specific weight of 1000kg / m3.
Manometric suction lift up to a max. of 8÷9 meters.

 Saer M-94-97-99 DataSheet 285.40 Kb

Ditt navn*



Bestillingsnummer / referanse


 Huk av for bestilling