Suitable for lifting, pressurising and distribution in civil and industrial installations, autoclave and cistern inlets, fire fighting and washing plants, irrigation systems. Draws from wells, tanks or natural basins.
The hydrodynamic configuration is semi-axial. This allows pumps with limited dimension to have high capacity and average head.
The pump is formed by an electric motor type:
4‘’ CL95 4’’ (oil bath motor)
6’’ CL95 4’’ (oil bath motor) or MS 152.
The flanging of connection to the motor and the shaft projection comply with the following standards:
6’’ NEMA 1-18.388 and 1-18.413 standard
The hydraulic specifications shown are based on use in cold water (15°C) at an atmospheric pressure of 1 bar and a density of 1000 Kg/m3. As these pumps are made in series, they are guaranteed according to the UNI EN ISO 9906, attachment A, on request UNI EN ISO 9906, level
• Fluid: chemically and mechanically non-aggressive,
with a maximum solid substance content equal to
the hardness and grain size of silt (40 g/m3)
• Maximum temperature: 30°C
• Maximum working pressure:
4” 23 bar
6” 39 bar
8” 35 bar
10” 30 bar
12” 31 bar
• Direction of rotation: Looking by the outlet,
anticlockwise for pumps 4″-6″(NR152) and clockwise
for pumps 6″-8″-10″-12″.
• Installation: vertical / horizontal.